The furnace is aging out
If an older system is starting to need major parts, replacement can be the more practical number to compare against repair.
Furnace installation Edmonton
Furnace installation in
Edmonton, quoted
before you commit.
For furnace replacement in Edmonton-area homes, get a quote that explains the equipment, installation scope, warranty, financing options, and final number before install day. Jackson installs furnaces in Edmonton, St. Albert, and Sherwood Park with Red Seal gas expertise and a clear replacement plan before the old furnace comes out.
No heat in an Edmonton winter isn't an inconvenience. It's an emergency.
Below −20°, a cold house and frozen pipes come fast — our 24/7 line answers any hour.
Replacement planning
Install planning
before install day.
The equipment matters, but the plan around it matters just as much. A proper replacement looks at the home, mechanical room, venting, gas, airflow, comfort goals, high-efficiency furnace options, and warranty terms before the furnace is chosen.
- Equipment options explained clearly.
- Written install pricing before install day.
- Removal and cleanup planned.
Every job follows our repair-first standard — diagnose the real fault, then put the price in writing.
Replacement signs
When furnace replacement
is worth pricing.
A replacement quote should help you compare the practical path before another winter gamble. The point is not to replace every older furnace. It is to know when repair risk, comfort issues, efficiency goals, or safety concerns make furnace replacement worth pricing in writing.
Repair cost keeps catching up
A large repair on an older furnace should be compared with a clear replacement option, especially when other components are already worn.
The heat exchanger is unsafe
A cracked or unsafe heat exchanger changes the conversation from repair-first to safe replacement planning.
The home is never comfortable
Short cycling, uneven rooms, loud operation, or weak airflow can point to sizing, ductwork, controls, or equipment fit.
Efficiency is part of the decision
A high-efficiency furnace can make sense when venting, condensate, budget, and comfort goals support the upgrade.
You want control before winter does
Planned furnace replacement gives you time to compare equipment, pricing, warranty, and financing before the weather decides for you.
Installation process
How Jackson handles
a furnace replacement.
The job is planned before the old furnace is removed, so install day is about executing the approved scope instead of discovering avoidable surprises.
- 01
Review the existing furnace
Current equipment, airflow, venting, gas, drain, access, thermostat controls, and comfort concerns are checked.
- 02
Write the replacement scope
Equipment, removal, venting or drain changes, code corrections, warranty, financing options, and price are written before install day.
- 03
Protect the home and remove old equipment
Floor protection, old furnace removal, work-area cleanup, and old-equipment removal expectations are included in the installation plan.
- 04
Install, start up, and explain
Gas, venting, drain, electrical, duct transition, startup, safety checks, warranty terms, and homeowner handoff are completed before the job is closed.
A real furnace replacement
Cold Riverbend bedrooms, fixed with the right-sized furnace.
A late-1990s Riverbend two-storey still had heat, but the upstairs bedrooms ran 3-4°C colder than the main floor and the 22-year-old furnace short-cycled. A previous quote was a same-size 80,000 BTU swap that would not have touched the comfort complaint.
We measured static pressure, return-air sizing, the venting path, and the gas line, then specced a Lennox EL296V 96% two-stage at 70,000 BTU with a sealed return added upstairs. The quote broke out furnace, venting, the new return, controls, and old-unit removal so nothing was hidden before install day.
Quote factors
What changes a furnace
replacement quote.
Furnace replacement cost is not a single sticker price. The home, equipment choice, venting path, drain route, duct transition, access, and any required code corrections all affect the final written quote.
Call 825-772-2665- Furnace sizing and capacity review
- Replacement options explained before you choose
- Gas connection and shutoff access checked
- Venting, combustion air, and clearances reviewed
- Condensate drain planning on high-efficiency installs
- Supply and return duct transition planned
- Thermostat and control compatibility reviewed
- Electrical, startup, and safety checks completed
- Old furnace removal included in the install plan
- Warranty terms reviewed before handoff
Transparent pricing
Furnace installation cost
in Edmonton.
The range is reviewed against equipment size, efficiency, installation complexity, venting, access, and code corrections.
$4,500–$6,000Standard replacementWritten quote before work starts
QuotedWhat affects the quoteReviewed before install
Parts + labourWarranty coverageExplained before handoff
Prices shown are typical ranges for standard furnace installations. Additional work required to bring your system up to code or correct pre-existing issues is quoted separately before any work begins. Financing options are available for qualifying furnace installation and replacement work.
Equipment choices
Single-stage, two-stage,
or modulating.
The right furnace choice depends on comfort goals, budget, ductwork, venting, controls, and how much value the homeowner gets from staged operation.
Better fit when
- The equipment size matches the home.
- Efficiency and staging fit the comfort goal and budget.
- Venting and condensate needs are planned.
- Airflow and duct transitions are included in the scope.
- Warranty and price are clear before approval.
- The homeowner understands the comfort difference before choosing.
Watch for
- The quote only talks about brand.
- Airflow is treated like someone else's problem.
- Venting and drainage are not discussed.
- Controls and thermostat compatibility are vague.
- Warranty terms are vague before handoff.
- The lowest price leaves important install work undefined.
Installation standard
How Jackson handles
a furnace replacement.
Replacement options in writing
You see the recommended equipment, install scope, price, and warranty before deciding.
Installed by a Red Seal gas technician
Gas, venting, condensate, startup, and safety checks are handled with mechanical-room experience.
Clean removal and installation
Floor protection, old furnace removal, work-area cleanup, and startup checks are planned into the job.
Financing available
Financing options are available for qualifying installation work after the replacement scope is clear.
Warranty terms explained
10-year parts and 1-year labour coverage are reviewed before handoff.
Family-run local service
You are dealing with a local company accountable for the installation and the explanation.
Brands we service & install
CarrierLennoxTraneGoodmanDaikinNapoleonKeepRiteYorkBryantICPAmanaOther major brands
Google reviews
What customers say
about Jackson.
★★★★★
Quick to get an appointment, arrived at the scheduled time, and gave a quick, honest diagnosis and pricing. Very professional service.
★★★★★
Rolled down a protective sheet on my floor, came back and re-checked all the lines, and makes things easy to understand.
★★★★★
Got my hot water tank and furnace replaced. Riley and his team was very professional, worked quickly and clean, and left the area cleaner than when they started.
Furnace Installation FAQ
Furnace Installation,
answered straight.
Still unsure? Call 825-772-2665 — no pressure, no call-centre script.
How much does furnace installation cost in Edmonton?
Furnace installation typically ranges from $4,500 to $6,000 for standard installations. Final pricing depends on equipment size, efficiency, installation complexity, venting, access, and required code corrections.
How long does furnace installation take?
Timing is confirmed with the written quote and depends on the home, access, equipment, venting, and any required corrections.
Do you offer financing for furnace replacement?
Yes. Financing options are available for qualifying furnace installation and replacement work. Rates, approvals, and payment examples are not promised in advance.
What warranty comes with a new furnace installation?
Furnace installations include 10-year parts and 1-year labour warranty coverage. Terms are explained before the job is complete.
Is the old furnace removed?
Yes. Old furnace removal is included in the installation plan, along with work-area protection, cleanup, startup checks, and a walkthrough before the job is complete.
Do I need a high-efficiency furnace?
Not always. A high-efficiency furnace can be a good fit when the home supports the venting, condensate drainage, airflow, budget, and comfort goals attached to the upgrade. The quote should explain why that option is recommended.
What affects furnace replacement cost?
Furnace replacement cost is affected by equipment size, efficiency, staging, venting, gas access, condensate drainage, duct transitions, electrical, thermostat controls, mechanical-room access, and any required code corrections.
Can Jackson compare repair and replacement?
Yes. If repair is still practical, that should be discussed. If replacement is safer or smarter, the replacement scope, price range, warranty, and financing options are reviewed before you commit.
Do you install furnaces in St. Albert and Sherwood Park?
Yes. Jackson Heating & Cooling provides furnace installation and furnace replacement service for Edmonton, St. Albert, and Sherwood Park homeowners.
Furnace replacement
Ready for a written
furnace installation quote?
Call Jackson Heating & Cooling for furnace installation options, clear pricing, warranty terms, and financing information for qualifying replacement work.
825-772-266524/7 Emergency Service · Monday to Saturday, 8:00 AM to 8:00 PM